Featured Post Today
print this page
Latest Post

Type Keyword And Press Search

Mid T733 Android Tablet Flashing Guide Using PhoenixSuit

Mid T733 is 7 inch Android OS based china tablet . T733 tablet contains Allwinner A13 Box chip with good processor speed 1.2Ghz , Cortex A8 ,Gpu Mali 400.Tablet is well documented with quality manufacturing like touch and plastic body . T733 tablet  support dual sim card for calling and texting with 2G service . Carrying many good features like dual camera,Dual Sim , fronter and back , Android tablet has Wifi , bluetooth , and microSD card slots. In my opinion  comparing cheap android tablets , having  T733 Tablet is a best choice.


back view
This tablet I have in hand shows "too many patter attempts". The most common issue again. The owner entered too many wrong pattern attempts that end up to "TMPA". Unfortunately when I searched to google, there is no available Hard Reset procedure for this tablet. I also tried to wipe it via Android Multi-Tools but the USB debugging was not check. So I decided to look for its firmware and flash it.

How To flash Mid T733 Android Tablet
1. Download PhoenixSuit software and install it on your laptop.
2. Download firmare T733.
3. Open PhoenixSuit, click FIRMWARE tab, browse for the .IMG firmware. See image below for the guide.


4. Follow instructions seen on the image below. Be sure that the drivers are properly installed.

5. Wait until the process is done.
on process
finish flashing

finish

testing camera



0 comments

How To Restore iPhone 4G When Disabled

An old man came to me in a rush, and lets me see the status of his iPhone 4G. It shows iPhone is disabled on the screen. Do you know what was the cause of this? I'm sure it has a lock code before it ends like that. And the lock code he was entering was wrong, that's why it ends up "iPhone is disabled". The only solution for this is to restore it, restore it to the latest version, iOS 7.0.4. I will show you how.


status
Things needed:
1. iTunes latest version.
2. Of course iPhone USB cable and your laptop.
3. iPhone3,1_7.0.4_11B554a_Restore.

Since it was disable, iTunes software will not detect it. In order to detect it by iTunes software you need to put the iPhone into DFU mode. How? Press both power on and home button for 10 seconds. Then un-press the power button for a few seconds until a DFU driver will pop up on your laptop and install its drivers. Your iTunes software must now detect your iPhone 4G.




Step By Step Procedure On How To Restore iPhone 4G.


Ensure that the iTunes software detects the iPhone. The press OK.

On you laptop, press SHIFT key, then click on restore. and look or browse for iPhone3,1_7.0.4_11B554a_Restore.







Then after loading the firmware, press restore.



















finish!

0 comments

Sun Text Unlimited 200

Dinoble na ang texting powers mo with the new and improved Sun Text Unlimited 200! 

Ang dating 500 texts, ngayon 1,000 texts to other networks na! May unlimited Sun texts at 4 hours Sun calls pa din. 

Valid 30 days for only P200. Ano pang hinihintay mo? Load na ng Sun Text Unlimited 200! 

Text TU200 to 247 now.


0 comments

How To Reset SKK Skypad Express Pattern Lock

status: pattern lock

I tried to search on google if there is a key combination for this tablet, but unfortunately there is no available hard reset method. So I decided to factory reset it via free software, Prince Android Toolkit v2. I just hope that the USB debugging is on. But it's not, we will end up flashing the tablet to its stock ROM. It's more complicated and more hard works;)) The customers said, she forgot the pattern lock. Do you know what will happen if you try to unlock it for several times with no success? YES! You will end up to "too many pattern attempts" or "TMPA" will appear on your tablet's screen. Let's try to use Prince Android Toolkit v2. By the way, this software was made by a Filipino Technician with a username iRT Prince. I've met him already, and this guy is still too young, thin, curly hair but very smart, most specially to Android Smartphones. He was one of the The MASTER on gsmsandwich forum...



Let's test it now. Power on your SKK Skypad Express. Insert USB cable to PC, and install all drivers. Now open the software. Press number 5 then ENTER. Wait for the tablet to reboot.




You are done now. You may install games and applications on you tablet now. Just be sure to check on the "Unkown Resources" to be able to install all .apk files.



ENJOY!

0 comments

Android Cloudfone Thrill 430D Hard Reset Procedure

I have in hand now this Android Cloudfone Thrill 430D, that has a lock code. My customer has forgotten the lock code. Since this is an Android Smartphone, expect that there is a key combination to hard reset it. How? Before we continue, let's first review the specifications and features of this Android Smartphone.

Cloudfone Thrill 430D Features and Specifications
  • General
    2G Network : GSM 850/900/1800/1900 (Sim 1 & Sim 2)
    3G Network : WCDMA 850/2100 (Sim 1 only)
    # of SIMs : Dual SIM (Dual Stand-by)
  • Body
    Dimensions : 123 x 67.8 x 12.4mm
    Weight : 75g
    Soft Keys : Menu, Home, Back, Search
    Hard Buttons : Power, Volume
    • Display
      Type : WVGA capacitive touchscreen, 262K colors
      Screen Size : 800*480 pixels, 4.3
      Multitouch : Yes
    • Sound
      Alert Types : Vibration, mp3, Ringtones
      Loudspeaker : Yes
      3.5mm jack : Yes
    • Memory
      Card slot : microSD up to 16GB
      Internal : 4 GB ROM, 512 MB RAM
    • Data
      GPRS : Yes
      EDGE : Yes
      Speed : HSDPA 7.2Mbps
      WLAN : WiFi 802.11 b/g, Wireless Hotspot via Data
      Bluetooth : Yes, v2.0
      USB : Yes
    • Camera
      Primary : 5MP, autofocus, flash
      Features : Geo-tagging, Touch Focus, Panorama, Face detection
      Video : Yes, 720p
      Secondary : Yes, 0.3MP
    • Features
      OS : Android OS, v4.0 (Ice Cream Sandwich)
      Chipset : MTK 6575
      CPU : Dual-core 1.0 GHz
      GPU : PowerVR Sgx531
      Sensors : Accelerometer, proximity
      Messaging : SMS (threaded view), MMS, Email, IM
      Browser : HTML
      FM : Receive, Transmitter
      GPS : Yes, with A-GPS support
      Google Services : Calendar,Docs,Gmail, Gtalk, Latitude, Maps, Navigation, Places, Play Store, Search, Street View, YoutubePreloaded Apps, Cloudfone, CloudStore
    • Battery
      Capacity : Li-ion 1450mAh
      Stand-by : 80-100 Hrs
      Talk time : 5 Hrs

    SOURCE: cloudfonemobile.com


    How To Hard Reset Android Cloudphone Thrill 430D
    1. Power off the phone. Press VOLUME DOWN and POWER KEY together. Un-press it when the Cloudfone logo appears.

    2. Using your volume key select "wipe data/factory reset", then press home key to do the process.



    3. Select "delete all user data", the press home key to do the process.

    4. Wait until the wipe process completed


    5. Reboot the system.

    Then smile :)



    you are done :)


    2 comments

    How To Update Cherry Mobile Fusion Bolt To Jelly Bean v4.2.2


    Hi. Today I will teach you  How To Update Cherry Mobile Fusion Bolt To Jelly Bean v4.2.2. If there is a problem with you handset and wasn't be able to fix it via Hard Reset, the final solution is to flash it, or reprogram it. Update or reprogram to higher version is just the same, like this Cherry Mobile Fusion Bolt.




    Things needed.
    1. Cherry Mobile Fusion Bolt Flasher. Download HERE
    2. Cherry Mobile Fusion Bolt Firmware(Jelly Bean 4.2.2). Download HERE


    Follow instructions below.


    1. Extract both 0417 firmware and the flashing tool.
    2. Turn off your Fusion Bolt.
    3. Connect one end of the USB Port into computer.
    4. Press and hold volume up while you are connecting one end of the USB port to your tablet.
    5. Open Device Manager on your PC.
    6. You should see the exclamation point on the "Unknown Device".
    7. Right click it and click "Update driver"
    8. Click Browse.
    9. Navigate the folder where you extracted the Flashing tool.
    10. Click OK. Wait until the prompt appears and click "Install Driver Software anyway".
    11. The installation should be done.
    12. Open the folder where you extracted the Flashing Tool.
    13. Right click "setup" and select "Run as Administrator".
    14. Install the Flashing tool.
    15. Open the flashing tool.
    16. Click "Replace" and navigate to the folder where you extracted the Ainol Novo 7 Venus firmware.
    17. Click the fw file.
    18. In recovery image, click image and click "rec".
    19. In misc image, click image and click "misc"
    20. In system image, click image and select "system".
    21. Make sure that Format Data and Format Cache is checked then click Down. Wait for successful message and unplug your tablet.
    22. Turn it on and you should see the boot of Ainol.








    credits to:  Pinoyscreencast
    0 comments

    How To Restore iOS 4.1 to iOS 6.1.3 For Untethered Jailbreak On iPhone 3gs


    restore
    with matching corneto :)





    Last December the Untethered Jailbreak for iOS 6.1.1 for iPhone 3gs was released. On this tutorial, I will teach you how to update your iPhone 3gs running iOS 4.1 to iOS 6.1.3 and jailbreak it using redsn0w_win_0.9.15b3. Take note this is now untethered. Last year I have unlocked this iPhone 3gs successfully with iOS 4.1, and jailbroken it with 6.15.baseband.

    Things you needed.
    1. iTunes software latest version.
    2. PC / Laptop
    3.  iPhone2,1_6.1.3_10B329_Restore
    4.  iPhone2,1_6.0_10A403_Restore
    5.  redsn0w_win_0.9.15b3

    Procedures:
    1. Restore to iOS 6.1.3
    2. Jailbreak using redsn0w_win_0.9.15b3. Browse on  iPhone2,1_6.0_10A403_Restore.
    Take note you must put a check on CYDIA and Downgrade IPAD Baseband.
    3. Drag untether.deb on Cydia/Autoinstall.
    4. To make the CYDIA icon appear, you must JUST BOOT and browse for  iPhone2,1_6.0_10A403_Restore and follow instructions.
    5. If Cydia icon appears the iPhone was now untethered!
    6. Unlock it using no wifi software, install appsync and reboot 2x.
    7. DONE
    success with signal



    0 comments

    How To Hard Reset Polaroid mid0714pcp01.133 Tablet

    Here is how to hard reset this Polaroid mid0714pcp01.133 Tablet. It requires a little trick, unlike other tablets.

    Power OFF the tablet.
    Hold Volume Up and Power On until the logo appears.
    Android Logo will comes out. You need to press the Volume Up and Power on shortly for two times.
    You will enter into recovery mode.
    By using volume up key, navigate to "wipe data/recovery reset" and press power on to do the job.
    Then "delete all user data" and press power on to do the job.
    Reboot.
    You are done hard resetting.

    Some screenshoots:
    Polaroid





    1 comments

    How To Hard Reset LG P705


    status of the phone before performing the hard reset.
    Happy New Year Everyone! Today I will teach you How To Hard Reset Android LG P705. And as other Android cellphones, the common issue is the popularly called TMPA. This Android cellphone requires a technique. It's not ordinary trick like the other Android Smartphones. Procedures are below.

    How To Hard Reset LG P705
    1. Switch off the phone. You may take out the battery and insert it again. Press and hold VOLUME DOWN key and POWER key using your left hand.

    2.Below the LCD screen is the menu and back key. Keep in mind that when you power on the phone, its LED will light up, okay? Now this is the trick, upon pressing Volume Down and Power key, tap the Menu key[button right side] using your right hand. And the very important thing here is you must tap immediately the Menu key using your right hand BEFORE the LG Logo will appear or will come out, BUT  make sure that you still holding the two keys[Volume Down and Power button]

    3. The you will feel that the phone will VIBRATE. The second trick is that when it vibrates release immediately the power key. You will notice that the logo will disappear, and eventually will appear again for the second time. Upon appearing the LG Logo for the second time unpress the two keys[Volume Down and Power button]

    4. You will see now the Android Logo. Wait for a few seconds for it is performing its hard reset procedure.

    See images below.
    now wipping. wait for a few seconds

    finish wipping

    the unit is okay now.



    I'm sure you will not make it on the very first time. Like me, I did it at the third time.. Good luck!
    0 comments
     
    Support : Creating Website | Johny Template | Mas Template
    Copyright © 2011. Cellphoneyeta - All Rights Reserved
    Template Created by Creating Website Published by Mas Template
    Proudly powered by Blogger