How To Flash Samsung S5360 Via Odin3 v1.85 free software

Tweet

Here is a tutorial on how to reprogram Samsung S5360. The status of the unit is it keeps on restarting.
Let me remind you always that whenever you flash a certain unit, you must  have at least 75% of battery charge to avoid any problem..

Here are the instructions.


1. Open Odin3 v1.85.
    - Click PIT tab and browse totoro_0623.pit
    - Click BOOTLOADER tab and browse DefaultCalDataWithBoot_S5360BOKI3_REV05.tar.md5
    - Click PDA tab ang browse PDA_S5360BOKJ1_REV05.tar.md5
    - Click PHONE and browse MODEM_S5360BOKI3_REV05.tar.md5
    - Click CSC and browse GT-S5360-csc_ext-TNLKJ1.tar.md5

SEE SCREENSHOT

2. After setting the necessary files PRESS CALL BUTTON, VOLUME UP AND POWER ON.  Then press VOLUME UP.

It will look like this

3. Insert USB Cable and install drivers.

4. After installing drivers, notice that the software automatically detects the comport that the software will be using.

5. Finally PRESS START and wait to finish.

6. If you see PASS, it means that flashing is successful.

Watch video instructions HERE. I personally made this video.

Share this article :

Tentang Saya
SHORTEDBOARD is from Pangasinan, PH. A Cellphone Technician since 2005. BS ECE graduate. A small time blogger with a simple dreams.
Follow Me : | +Google | Facebook | Twitter