How To Unlock MyPhone My28 Via Flashing

Here is a guide on How To unlock your MyPhone My28 lock in Smart provider.

1. Download Flasher.
2. Download Firmware.
3. Download SPD Driver and install it.
4. Open UPGRADEDOWNLOAD_R2.9.9015 folder. Open Bin folder and look for UpgradeDownload. Double click to open the software.
5. From the software, click Load Packet. Browse the firmware or the PAC file named MyPhone My28_Smartlock(OPENLINE) by Team28DEVS.
6. Press start downloading.
7. Power off the phone. Press volume down and insert the usb cable(note: all drivers must be installed, or else the program will not run)
8. Wait until finish.
9. Finally take out the battery, and reinsert. Power on the phone. Wait for a few minutes.
10. SMILE.

credits to: Team28DEVS

Download MyPhone M28 Openline mediafire link

Posted by Cellphoneyeta Sunday, February 28, 2016 0 comments

Apple Releases Updated Version of iOS 9.2.1 to Fix Devices Bricked by 'Error 53'

Apple today released an updated version of iOS 9.2.1, which is designed to prevent the "error 53" device-bricking message that some iOS users received after having their iPhones or iPads repaired by third-party services using components not sourced from the original device. 

Non-matching repair components that affected the Touch ID fingerprint sensor caused an iOS device to fail a Touch ID validation check because the mismatched parts were unable to properly sync. The validation check occurred during an iOS update or restore, and when failed, Apple disabled the iPhone, effectively "bricking" it in an effort to protect Touch ID and the related Secure Enclave that stores customer fingerprint information. 

Apple originally explained that error 53 was intentional, implemented as a way to prevent the use of a malicious Touch ID sensor that could be used to gain access to the Secure Enclave, but customers with bricked devices were not happy with the explanation and Apple found itself facing a class-action lawsuit. 

Today's update will restore iPhones and iPads that have been disabled due to "error 53" to full working condition and it will ensure that future iOS devices that have had similar repairs will not be fully disabled. Touch ID will not, however, be accessible until Apple-authorized repairs are made to a device affected by the issue. 

Alongside the new version of iOS 9.2.1, Apple has also published a support document outlining how customers can resolve the "error 53" problem, and it has issued an apology, shared by TechCrunch. Apple now says the error 53 bricking issue was meant to be a factory test and was never intended to affect customers.

"Some customers' devices are showing 'Connect to iTunes' after attempting an iOS update or a restore from iTunes on a Mac or PC. This reports as an Error 53 in iTunes and appears when a device fails a security test. This test was designed to check whether Touch ID works properly before the device leaves the factory. 

Today, Apple released a software update that allows customers who have encountered this error message to successfully restore their device using iTunes on a Mac or PC. 

We apologize for any inconvenience, this was designed to be a factory test and was not intended to affect customers. Customers who paid for an out-of-warranty replacement of their device based on this issue should contact AppleCare about a reimbursement."

The updated version of iOS 9.2.1 is available through iTunes and is not designed for customers who update their devices over the air. It can be downloaded on the iPhone 6, 6s, 6 Plus, 6s Plus, iPad mini 3, iPad mini 4, iPad Air 2, and iPad Pro. 

source:www.macrumors.com

Posted by Cellphoneyeta Friday, February 19, 2016 0 comments

Good News for Moto G 2014 Users Motorola starts rolling out Marshmallow update

The Android 6.0 Marshmallow update for the second-generation Motorola Moto G has started rolling out. The update is currently hitting both 3G and LTE-enabled variants in India.

Posted by Cellphoneyeta Thursday, February 11, 2016 0 comments

How To Fix Bricked Starmobile UP HD Gold Color

The first first method to fix your Bricked Starmobile UP HD Gold Color is to do the Hard Reset Method. To lear how to hard reset, just link to this post, How To Hard Reset Starmobile UP HD

If it doesn't solve the problem, then reprogram will be your last option. How to reprogram it? Just follow the instructions below.

How to flash  Starmobile UP HD Via SPFlash Tool
1. Download latest SPFlash Tool.
2. Download Starmobile UP HD Firmware.
3. Open SPFlash Tool. Press scatter loading and browse for the downloaded Starmobile UP HD firmware folder, look for MT6582_Android_scatter.
4. Use download only, the press "Download"
5. With the phone off, press volume down button and insert usb cable. Take note necessary drivers must be installed or else the program will not be running.
6. See image below for the guide.

If the operation has finish, power on the phone. It should be okay now :) If it ends up on Starmobile logo only, just Hart Reset it.

If there's an error on the software like the image show below, that error shows that you have downloaded the incompatible firmware. Search for another firmware ang re-flash your unit.

Everything goes well :)

Posted by Cellphoneyeta Monday, February 08, 2016 0 comments

How To Fix Samsung I9070 Deadbot

I use RIFF Box to fix this Samsung I9070 Deadbot. First dismantle the unit and resolder the pin out shown on the Riff Box software. See the software image below.

Now it's done :)

Posted by Cellphoneyeta Thursday, February 04, 2016 0 comments

Ultimate Multi Tool - GSM v1.8 Relased! DRK Fix, Marvel by USB, Huawei FRP and more..

We are pleased to announce
Ultimate Multi Tool - GSM v1.8
Innovative and Intelligent


Whats New:
[x] Added Samsung DRK (Device Root Key) Fix
--- Just Click DRK Fix Button and done.
--- Works over UART Cable connection (RJ45).


[x] Added Samsung Marvel Unlock, Write Cert via USB Cable
--- No Need of UART Cable from now.
--- Easily Unlock or Write Certificate with only USB Cable.
--- Just tick "Do NOT use UART (USB)" and software will use USB.
--- If in some cases, you need to use UART, just untick that checkbox.


[x] Added Numerous Options in Miscellaneous Tab
--- MTK FRP Reset
--- Qualcomm FRP Reset
--- Huawei SPD FRP Reset
--- MTK Boot Unlock
--- Qualcomm Boot Unlock
--- All these features are supported in Fastboot Mode only.
--- If phone does not enter Fastboot, above features will not work.


[x] Added Samsung SPD Phones in Supported List
--- G361H
--- J100H.
--- We already support almost all Samsung SPD Phones, fast and easy.


[x] Added Some Handy Functions in Samsung > Tools
--- Hidden_Menu_Enable - Open Hidden Menu Enable Option on Phone Screen.
--- IOT_HIDDEN_MENU - It will open Hidden Menu on Phone Display.


[x] Revised Anti-Malware Engine and Database
--- Now our Proven Technique is more better than before.
--- Update Malware Database to the latest.


[x] Added Prnt Scrn Button
--- Now its much easier to take screenshot of the operation done.
--- It will include only UMT Software window, so no need to resize or crop.


[x] Some Cosmetic Changes
--- Arranged FRP / Reactivation / EE / Rent Center Unlock in Combo.
--- Select desired operation and click Reset Button.



Special Thanks to:
--- ysr84.
--- imeigurus.




It Has Begun...
Stay Tuned...
Some Amazing News On The Way...

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::



Stil NOT a Ultimate Multi Tool User?
Choose your reseller from here now and feel The Power of Real Ultimate Tool.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download UMT_GSM_1.8.exe from Installer folder.
- Do not use any Download Manager.
- Enjoy!

Posted by Cellphoneyeta Wednesday, February 03, 2016 0 comments